System Logs - Lantronix SecureLinx SLC48 User Manual

To restore the SLC to factory default settings:
admin config factorydefaults [savesshkeys <enable|disable>]
[preserveconfig <Config Params to Preserve>]
<Config Params to Preserve> is a comma-separated list of current configuration
parameters to retain after the config restore or factorydefaults:
nt – Networking
sv – Services
dt - Date/Time
To restore a saved configuration to the SLC:
admin config restore <Config Name> location
<default|ftp|sftp|nfs|cifs|pccard> [nfsdir <NFS Mounted Dir>]
[pccardslot <upper|lower>] [keepconfig <Config Params to Keep>]
[preserveconfig <Config Params to Prserve>]
<Config Params to Preserve> is a comma-separated list of current configuration
parameters to retain after the config restore or factorydefaults:
nt – Networking
sv – Services
dt - Date/Time
To save the current SLC configuration to a selected location:
admin config save <Config Name> location
<default|ftp|sftp|nfs|cifs|pccard> [nfsdir <NFS Mounted Dir>]
[pccardslot <upper|lower>]
To list the configurations saved to a location:
admin config show <default|ftp|sftp|nfs|cifs|pccard> [nfsdir <NFS
Mounted Dir>] [pccardslot <upper|lower>]
To run the quick setup script:
admin quicksetup

System Logs

The System Logs page allows you to view various system logs. (See
information about system logs.)
1. From the main menu, select SLC Maintenance – System Logs. The following
page displays:
SecureLinx SLC User Guide
lu - Local Users
dp - Device Ports
pc - PC Card
lu - Local Users
dp - Device Ports
pc - PC Card
12: Maintenance and Operation
7: Services for more
145