Nis Commands - Lantronix SecureLinx SLC48 User Manual

14: Command Reference
Description
Deletes a local user.
set localusers password
Syntax
set localusers password <User Login>
Description
Sets a login password for the local user.
show localusers
Syntax
show localusers [user <User Login>]
Description
Displays local users.

NIS Commands

set nis
Syntax
set nis <one or more parameters>
Description
Configures the SLC to use NIS to authenticate users who log in via the Web, SSH, Telnet, or the
console port.
Parameters
broadcast <enable|disable>
clearports <Port List>
custommenu <Menu Name>
dataports <Port List>
domain <NIS Domain Name>
group <default|power|admin>
listenports <Port List>
master <IP Address or Hostname>
permissions <Permission List>
Note: See User Permissions Commands on page 180 for information on groups and user rights.
slave1 <IP Address or Hostname>
slave2 <IP Address or Hostname>
slave3 <IP Address or Hostname>
slave4 <IP Address or Hostname>
slave5 <IP Address or Hostname>
state <enable|disable>
SecureLinx SLC User Guide 178