Lantronix SecureLinx SLC48 User Manual page 108

2. Enter the following:
Enable LDAP
Server
Port
Base
SecureLinx SLC User Guide
Displays selected if you enabled this method on the first
User Authentication page. If you want to set up this
authentication method but not enable it immediately, clear
the checkbox.
The IP address or host name of the LDAP server.
Number of the TCP port on the LDAP server to which the
SLC talks. The default is 389.
The name of the LDAP search base (e.g., dc=company,
dc=com). May have up to 80 characters.
10: User Authentication
108