Lantronix SecureLinx SLC48 User Manual page 141

Login Banner
Logout Banner
Web
SLC Firmware
Update Firmware
Load Firmware via
Firmware Filename
Key
FTP/TFTP/SFTP
Server
Path
SecureLinx SLC User Guide
The text to display on the command line interface
after the user logs in. Default is blank.
Note: To create more lines, use the \n character
sequence.
The text to display on the command line interface
after the user logs out. Default is blank.
Note: To create more lines use, the \n character
sequence.
Number of minutes (5-120) after which the SLC
web session times out. The default is 5. To avoid
timeouts, select No.
If the session times out, refresh the browser
page and enter your user id and password to
open another web session.
Note: If you close the browser without logging off
the SLC first, you will have to wait for the timeout
time to expire. You can also end a web session
by using the admin web terminate
command at the CLI or by asking your system
administrator to terminate your active web
session.
To update the SLC firmware, select the
checkbox. If you select this option, the SLC
reboots after you apply the update.
From the drop-down list, select the method of
loading the firmware. Options are FTP, TFTP,
HTTPS and SFTP (Secure FTP). FTP is the
default.
If you select HTTPS, the Upload File link
becomes active. Select the link to open a popup
window that allows you to browse to a firmware
update file to upload.
The name of the firmware update file downloaded
from the Lantronix web site.
A key for validating the firmware file. The key is
provided with the firmware file (32 hex
characters).
The IP address or host name of the server used
for obtaining updates and saving or restoring
configurations. May have up to 64 alphanumeric
characters; may include hyphens and
underscores.
The default path on the server for obtaining
firmware update files and getting and putting
configuration save files.
12: Maintenance and Operation
141