Lantronix SecureLinx SLC48 User Manual page 102

3. Select or clear the checkboxes for the following rights:
Full Administrative
Networking
Services
Local Users
Remote
Authentication
Date/Time
SSH Keys
User Menus
Device Ports
PC Card
Reboot &
Shutdown
Firmware &
Configuration
Diagnostics &
Reports
SLC Network
Web Access
Listen Ports
Data Ports
Clear Port Buffers
4. Click the Add/Edit User button. The user information displays in the Remote Users
list at the bottom of the page. The abbreviations (e.g., FA, NT, and SV stand for the
user rights (e.g., Full Administrative, Networking, and Services, respectively.)
5. Click Apply.
Note: The logged-in user's name displays above the icon bar on the top left of each
Web-Manager page. The main menu displays only those options to which the user has
rights.
To add a remote user based on an existing remote user:
Shortcut
1. Select the remote user. The fields in the top part of the page display the current
values for the user.
SecureLinx SLC User Guide
Right to add, update, and delete all editable fields.
Right to enter Network settings.
Right to enable and disable system logging, SSH and Telnet
logins, SNMP, and SMTP.
Right to add or delete local users on the system.
Right to assign a remote user to a user group and assign a
set of rights to the user.
Right to set the date and time.
Right to set SSH keys for authenticating users.
Right to create or edit a custom user menu for the CLI.
Right to enter device port settings.
Right to enter modem settings for PC cards.
Right to use the CLI or shut down the SLC and then reboot it.
Right to upgrade the firmware on the unit and save or restore
a configuration (all settings).
Right to obtain diagnostic information and reports about the
unit.
Right to view and manage SLCs on the local subnet.
Right to access Web-Manager.
The ports the user has permission to monitor using the
connect listen command.
The ports the user has permission to monitor and interact
with using the connect direct command.
The ports whose port buffer the user has permission to clear
using the set locallog clear command.
10: User Authentication
102