Lantronix SecureLinx SLC48 User Manual page 165

Device Port settings successfully updated.
[slc]> set deviceport port 1 localsecret "password"
Device Port settings successfully updated.
[slc]> set deviceport port 1 modemstate dialin
Device Port settings successfully updated.
[slc]>
2. Configure the device port that is connected to the console port of the Sun UNIX
server:
[slc]> set deviceport port 2 baud 57600 flowcontrol none
Device Port settings successfully updated.
3. Dial into the SLC via the modem using a terminal emulation program on a remote
PC. A command line prompt displays.
4. Log into the SLC.
CONNECT 57600
Welcome to the SLC
login: sysadmin
Password:
Welcome to the SecureLinx Console Manager
Model Number: SLC48
For a list of commands, type 'help'.
[slc]>
5. Connect to the SUN Unix server using the direct command.
[slc]> connect direct deviceport 2
SunOS 5.7
login: frank
Password:
Last login: Wed Jul 14 16:07:49 from computer
Sun Microsystems Inc.
SunOS computer 5.7 Generic_123485-05 sun4m sparc SUNW,SPARCstation-20
$
6. Use the escape sequence to escape from direct mode back to the command line
interface.
SecureLinx SLC User Guide
SunOS 5.7 Generic October 1998
13: Application Examples
165