Firewall Commands; Routing - Lantronix SecureLinx SLC48 User Manual

Firewall Commands

The following CLI commands correspond to the web page entries described above.
To configure packet filtering for incoming network traffic:
set firewall <one or more parameters>
Parameters:
To view firewall settings:
show firewall

Routing

The SLC allows you to define static routes and, for networks using Routing Information
Protocol (RIP)-capable routes, to enable the RIP protocol to configure the routes
dynamically.
To configure routing settings:
1. From the main menu, select Network Settings-Routing. The following page
displays:
SecureLinx SLC User Guide
allowport <http|https|smbcifs|ssh|telnet>
denyport <http|https|smbcifs|ssh|telnet>
invisibletoping <enable|disable>
rejectmethod <reply|ignore>
state <enable|disable>
6: Basic Parameters
47