Status/Reports - Lantronix SecureLinx SLC48 User Manual

Status/Reports

On this page, you can view the status of the SLC ports and power supplies and generate
a selection of reports.
Note: Status and statistics shown on the web interface represent a snapshot in time. To
see the most recent data, you must reload the web page.
1. From the main menu, select SLC Maintenance – Status/Reports. The following
page displays:
The top half of the page displays the status of each port and the power supplies.
Green indicates that the port connection or power supply is active and functioning
correctly. Red indicates an error or failure.
2. Enter the following:
View Report
View Report
SecureLinx SLC User Guide
Select as many of the reports as desired, or select
All.
Port Status: Displays the status of each device
port: mode, user, any related connections, and
serial port settings.
Port Counters: Displays statistics related to the
flow of data through each device port.
IP Routes: Displays the routing table.
12: Maintenance and Operation
153