Custom User Menus; Custom User Menu Commands - Lantronix SecureLinx SLC48 User Manual

To display SSH keys that have been imported:
show sshkey import <one or more parameters>
Parameters:
To display SSH keys that have been exported:
show sshkey export <one or more parameters>
Parameters:
3. Click Apply. New entries display in the Imported SSH Keys table and Exported
SSH Keys table, as applicable.

Custom User Menus

Local and remote users can have a custom user menu as their command line interface
rather than the standard command set. Instead of typing each command, the user enters
the number associated with the command. Each command can also have a nickname
that can display in the menu instead of the command.
From the current menu, a user can display another menu, thus allowing menus to be
nested. The special command showmenu <Menu Name> displays a specified menu.
The special command returnmenu redisplays the parent menu if the current menu was
displayed from a showmenu command.
The user with appropriate rights creates and manages custom user menus from the
command line interface, but can assign a custom user menu to a user from either the
command line or the web interface.

Custom User Menu Commands

When creating a custom user menu, note the following limitations:
SecureLinx SLC User Guide
[keyhost <SSH Key IP Address or Name>]
[keyuser <SSH Key User>]
[viewkey <enable|disable>]
[keyhost <SSH Key IP Address or Name>]
[keyuser <SSH Key User>]
[viewkey <enable|disable>]
Maximum of 20 custom user menus
Maximum of 50 commands per custom user menu (logout is always the last
command)
Maximum of 15 characters for menu names
Maximum of five nested menus can be called.
No syntax checking (Enter each command correctly.)
10: User Authentication
125