Radius Commands - Lantronix SecureLinx SLC48 User Manual

14: Command Reference
show nis
Syntax
show nis
Description
Displays NIS settings.

RADIUS Commands

set radius
Syntax
set radius <one or more parameters>
Description
Configures the SLC to use RADIUS to authenticate users who log in via the Web, SSH, Telnet, or
the console port.
Parameters:
state <enable|disable>
clearports <Port List>
custommenu <Menu Name>
custommenu <Menu Name>
dataports <Port List>
group <default|power|admin>
listenports <Port List>
permissions <Permission List>
Note: See User Permissions Commands on page 180 for information on groups and user rights.
timeout <enable|1-30>
Sets the number of seconds after which the connection attempt times out. It may be 1-30 seconds.
set radius server
Syntax
set radius server <1|2> host <IP Address or Hostname> secret <Secret>
[port <TCP Port>]
Description
Identifies the RADIUS server(s), the text secret, and the number of the TCP port on the RADIUS
server.
Note: The default port is 1812.
show radius
Syntax
show radius
Description
Displays RADIUS settings.
SecureLinx SLC User Guide 179