Slc Network Commands - Lantronix SecureLinx SLC48 User Manual

14: Command Reference
location <Physical Location>
netlog <off|error|warning|info|debug>
nms <IP Address or Name>
portssh <TCP Port>
rocommunity <Read-Only Community Name>
rwcommunity <Read-Write Community Name>
Sets a password for an SNMP manager to access the read-only data the SLC SNMP agent
provides and to modify data where permitted.
servlog <off|error|warning|info|debug>
smtpserver <IP Address or Hostname>
snmp <enable|disable>
ssh <enable|disable>
syslogserver1 <IP Address or Name>
syslogserver2 <IP Address or Name>
telnet <enable|disable>
timeoutssh <disable or 1-30>
timeouttelnet <disable or 1-30>
traps <enable|disable>
v1ssh <enable|disable>
v3password <Password for v3 auth>
v3user <User for v3 auth>
webssh <enable|disable
webtelnet <enable|disable>
show services
Syntax
show services
Description
Displays current services.

SLC Network Commands

set slcnetwork
Syntax
set slcnetwork <one or more parameters>
Description
Detects and displays all SLC or user-defined IP addresses on the local network.
Parameters
add <IP Address>
delete <IP Address>
search <localsubnet|ipaddrlist|both>
SecureLinx SLC User Guide 203