Lantronix SecureLinx SLC48 User Manual page 119

2. Enter the following:
Enable TACACS+
TACACS+ Server
Secret
Encrypt Messages
Custom Menu
Data Ports
Listen Port
Clear Port Buffers
3. In the User Rights section, select the user group to which TACACS+ users will
belong.
Group
4. Select or clear the checkboxes for the following rights:
Full Administrative
Networking
Services
Date/Time
Local Users
SecureLinx SLC User Guide
Displays selected if you enabled this method on the User
Authentication page. If you want to set up this authentication
method but not enable it immediately, clear the checkbox.
You can enable TACACS+ here or on the first User Authentication
page. If you enable TACACS+ here, it automatically displays at
the end of the order of precedence on the User Authentication
page.
IP address or host name of the TACACS+ server
Shared secret for message encryption between the SLC and the
TACACS+ server. Enter an alphanumeric secret of up to 127
characters.
Select the checkbox to encrypt messages between the SLC and
the TACACS+ server. Selected by default.
If custom menus have been created (see
page 125), you can assign a default custom menu to TACACS+
users.
The ports users are able to monitor and interact with using the
connect direct command.
The ports users are able to monitor using the connect listen
command.
The ports whose port buffer users may clear using the set
locallog clear command.
Select the group to which the TACACS+ users will belong:
Default Users: This group has only the most basic rights
(described above).
Power Users: This group has the same rights as Default
Users plus Networking, Date/Time, Reboot & Shutdown,
and Diagnostics & Reports.
Administrators: This group has all possible rights.
Right to add, update, and delete all editable fields.
Right to enter Network settings.
Right to enable and disable system logging, SSH and Telnet
logins, SNMP, and SMTP.
Right to set the date and time.
Right to add or delete local users on the system.
10: User Authentication
Custom User Menus on
119