Lantronix SecureLinx SLC48 User Manual page 96

Break
Sequence
Custom Menu
4. Click the Add/Edit User button. The new user displays in the Local Users list
below.
5. Click Apply.
Notes:
To add a user based on an existing user:
Shortcut
1. In the Local Users list, select the user. The fields in the top part of the page display
the current values for the user.
2. Change the Login to that of the new user. It is best to change the Password too.
3. Click the Add/Edit User button. A new user is created with the original user's
settings.
4. Click Apply.
To edit a local user:
1. In the Local Users list, select the user. The fields in the top part of the page display
the current values for the user.
2. Update values as desired.
3. Click the Add/Edit User button. The updated values display in the Local Users list.
4. Click Apply.
To delete a local user:
1. In the Local Users list, select the user.
2. Click the Delete User button.
3. Click Apply.
To change the sysadmin password:
1. In the Local Users list, select sysadmin (first row).
2. Enter the new password in the Password and Retype Password fields.
SecureLinx SLC User Guide
A series of one to ten characters users can enter on the
command line interface to send a break signal to the external
device. A suggested value is Esc+B (escape key, then
uppercase "B" performed quickly but not simultaneously). You
would specify this value as \x1bB, which is hexadecimal (\x)
character 27 (1B) followed by a B.
If custom menus have been created (see
on page 125), you can assign a default custom menu to the
user.
Note: In the Local Users table, if the menu assigned to a local
user no longer exists, it is marked with an asterisk (*).
To assign configuration rights for a local user, go to
page 94.
The logged-in user's name displays above the menu. The menu displays only the
options for which the user has rights.
10: User Authentication
Custom User Menus
Setting up Local Users on
96