Local User Rights Commands; Remote User Permissions - Lantronix SecureLinx SLC48 User Manual

User Menus
Device Ports
PC Card
Reboot &
Shutdown
Firmware &
Configuration
Diagnostics &
Reports
SLC Network
Web Access
4. Click Apply.
Note: The logged-in user's name displays above the menu. The menu displays only the
options for which the user has rights.

Local User Rights Commands

The following CLI commands correspond to the web page entries described above.
To add a local user to a user group or to change the group the user belongs to:
set localusers add|edit <user> group <default|power|admin>
To set a local user's permissions (not defined by the user group):
set localusers add|edit <user> permissions <Permission List>
where
<Permission List> is one or more of nt, sv, dt, lu, ra, sk, um, dp, pc,
rs, rc, dr, wb, sn, ad
To remove a permission, type a minus sign before the two-letter abbreviation for a user
right.
To view the rights of the currently logged-in user:
show user

Remote User Permissions

Remote users are those not in the database of local users. They are authenticated by
methods such as NIS, LDAP, and RADIUS.
The system administrator can assign remote users to a user group, assign a set of user
rights, and grant port permissions to individual remote users.
SecureLinx SLC User Guide
Right to create or edit a custom user menu for the CLI.
Right to enter device port settings. Includes creating
bidirectional and unidirection connections
Right to enter modem settings for PC cards. Includes
managing storage PC Cards.
Right to shutdown or reboot the SLC.
Right to upgrade the firmware on the unit and save or restore
a configuration (all settings).
Right to obtain diagnostic information and reports about the
unit.
Right to view and manage SLCs on the local subnet.
Right to access Web-Manager.
10: User Authentication
100