Equivalent Services Commands - Lantronix SecureLinx SLC48 User Manual

NMS
Location
Contact
Read-Only
Community
Read-Write
Community
V3 User
V3 Password and
Retype Password
SMTP Server
4. To save, click Apply.

Equivalent Services Commands

The following CLI commands correspond to the web page entries described above.
To configure services (system logging, SSH and Telnet access, SSH and Telnet
timeout, SNMP agent, email (SMTP) server, and audit log):
set services <one or more services parameters>
Parameters:
SecureLinx SLC User Guide
When SNMP is enabled, an NMS (Network
Management System) acts as a central server,
requesting and receiving SNMP-type information from
any computer using SNMP. The NMS can request
information from the SLC and receive traps from the
SLC. Enter the IP address of the NMS server. Required
if you selected Enable Traps.
Physical location of the SLC (optional). Useful for
managing the SLC using SNMP. Up to 20 characters.
Description of the person responsible for maintaining
the SLC, for example, a name (optional). Up to 20
characters.
A string that acts like a password for an SNMP
manager to access the read-only data the SLC SNMP
agent provides. The default is public.
A string that acts like a password for an SNMP
manager to access the read-only data the SLC SNMP
agent provides and to modify data where permitted.
The default is private.
SNMP v3 is secure and requires user-based
authorization to access SLC MIB objects. Enter a user
ID. The default is snmpuser. Up to 20 characters.
Password for accessing the SNMP v3. The default is
SNMPPASS. Up to 20 characters.
IP address of your network's Simple Mail Transfer
Protocol (SMTP) relay server.
auditlog <enable|disable>
auditsize <Size in Kbytes>
Range is 1-500 Kbytes.
authlog <off|error|warning|info|debug>
clicommands <enable|disable>
contact <Admin contact info>
devlog <off|error|warning|info|debug>
7: Services
56