Lantronix SecureLinx SLC48 User Manual page 185

where <SSH flags> is one or more of:
user <Login Name>
version <1|2>
command <Command to Execute>
tcp <IP Address> [port <TCP Port>]
telnet <IP Address or Name> [port <TCP Port>]
udp <IP Address> [port <UDP Port>
connect listen deviceport
Syntax
connect listen deviceport <Device Port # or Name>
Description
Monitors a device port.
connect terminate
Syntax
connect terminate <Connection ID>
Description
Terminates a bidirectional or unidirectional connection.
connect unidirection
Syntax
connect unidirection <Device Port # or Name> dataflow
<toendpoint⎢fromendpoint> <endpoint>
Description
Connects a device port to another device port or an outbound network connection (data flows in
one direction).
Parameters
Endpoint is one of:
charcount <# of Chars>
charseq <Char Sequence>
datetime <MMDDYYhhmm[ss]>
deviceport <Port # or Name>
exclusive <enable|disable>
ssh <IP Address or Name> [port <TCP Port][<SSH flags>]
where <SSH flags> is one or more of:
user <Login Name>
version <1|2>
command <Command to Execute>
tcp <IP Address> [port <TCP Port>]
SecureLinx SLC User Guide
14: Command Reference
185