Remote User Commands - Lantronix SecureLinx SLC48 User Manual

2. Change the Remote Login to that of the new user. It is best to change the
Password too.
3. Click the Add/Edit User button. A new user is created with the original user's
settings.
4. Click Apply.
To edit a remote user:
1. Select the remote user. The fields in the top part of the page display the current
values for the user.
2. Update values as desired.
3. Click the Add/Edit User button. The updated values display in the Remote Users
table.
4. Click Apply.
To delete a remote user:
1. Select the remote user.
2. Click the Delete User button.
3. Click Apply.

Remote User Commands

The following CLI commands correspond to the web page entries described above.
To configure whether remote users who are not part of the remote user list will be
authenticated:
set remote users listonlyauth <enable|disable>
To configure attributes for users who log in by a remote authentication method:
set remoteusers add|edit <User Login> [<parameters>]
Parameters
To remove a remote user:
set remoteusers delete <User Login>
SecureLinx SLC User Guide
clearports <Port List>
dataports <Port List>
group <default|power|admin>
listenports <Port List>
permissions <Permissions List>
where
<Permission List> is one or more of nt, sv, dt, lu, ra, sk,
um, dp, pc, rs, rc, dr, wb, sn, ad
To remove a permission, type a minus sign before the two-letter
abbreviation for a user right.
10: User Authentication
103