Date And Time Commands - Lantronix SecureLinx SLC48 User Manual

Date and Time Commands

The following CLI commands correspond to the web page entries described above.
To set the local date, time, and local time zone (one parameter at a time):
set datetime <one date/time parameter>
Parameters:
To view the local date, time, and time zone:
show datetime
To synchronize the SLC with a remote time server using NTP:
set ntp <one or more ntp parameters>
Parameters:
To view NTP settings:
show ntp
SecureLinx SLC User Guide
date <MMDDYYhhmm[ss]>
timezone <Time Zone>
Note: If you type an invalid time zone, the system guides you through the
process of selecting a time zone.
localserver1 <IP Address or Hostname>
localserver2 <IP Address or Hostname>
localserver3 <IP Address or Hostname>
poll <local|public>
publicserver <IP Address or Hostname>
state <enable|disable>
sync <broadcast|poll>
6: Basic Parameters
51