Lantronix SecureLinx SLC48 User Manual page 99

1. On the User Authentication – Local Users page, select a user from the table and
click Settings to the right of the User Rights field. The User Authentication – Local
User Rights page displays for the selected user.
2. Enter the following:
Login (view only)
Group
3. Select or clear the checkboxes for the following rights:
Full Administrative
Networking
Services
Date/Time
Local Users
Remote
Authentication
SSH Keys
SecureLinx SLC User Guide
User ID of selected user.
Select the group to which the user will belong:
Default Users: This group has only the most basic rights
(described above).
Power Users: This group has the same rights as Default
Users plus Networking, Date/Time, Reboot & Shutdown,
and Diagnostics & Reports.
Administrators: This group has all possible rights.
Right to perform any function on the SLC.
Right to enter network and routing settings.
Right to enable and disable system and audit logging, SSH
and Telnet logins, SNMP, and SMTP. Includes NFS and
CIFS.
Right to set the date and time.
Right to add or delete local users on the system.
Right to assign a remote user to a user group and assign a
set of rights to the user. Includes configuring remote
authentication methods and ordering
Right to set SSH keys for authenticating users.
10: User Authentication
99