Lantronix SecureLinx SLC48 User Manual page 31

IP Address (if
specifying)
Subnet Mask
Default Gateway
Hostname
Domain
Time Zone
Date/Time
Sysadmin
password
After you complete the Quick Setup script, the changes take effect immediately.
SecureLinx SLC User Guide
An IP address that will be unique and valid on your
network and in the same subnet as your PC. There is no
default.
If you selected DHCP or BOOTP, this prompt does not
display.
Enter all IP addresses in dot-quad notation. Do not use
leading zeros in the fields for dot-quad numbers less than
100. For example, if your IP address is 172.19.201.28, do
not enter 028 for the last segment.
Note: Configurations with the same IP subnet on multiple
interfaces (Ethernet or PPP) are not currently supported.
The subnet mask specifies the network segment on which
the SLC resides. There is no default. If you selected DHCP
or BOOTP, this prompt does not display.
IP address of the router for this network. There is no
default.
The default host name is slc. There is a 64-character limit
(contiguous characters, no spaces).
Note: The host name becomes the prompt in the
command line interface.
If desired, specify a domain name (for example,
support.lantronix.com). The domain name is used for host
name resolution within the SLC. For example, if abcd is
specified for the SMTP server, and mydomain.com is
specified for the domain, if abcd cannot be resolved, the
SLC attempts to resolve abcd.mydomain.com for the
SMTP server.
If the time zone displayed is incorrect, enter the correct
time zone and press Enter. If the entry is not a valid time
zone, the system guides you through selecting a time
zone. A list of valid regions and countries displays. At the
prompts, enter the correct region and country.
If the date and time displayed are correct, type n and
continue. If the date and time are incorrect, type y and
enter the correct date and time in the formats shown at the
prompts.
Enter a new sysadmin password.
4: Quick Setup
31