Lantronix SecureLinx SLC48 User Manual page 82

9 : C o n n e c t i
9 : C o n n e c t i
Chapter 8: Device Ports
connected to an external device. This chapter describes how to use the Connections web
page to connect external devices and outbound network connections (such as Telnet or
SSH) in various configurations.
An SLC device port attached to an external device can be connected to one of the
following endpoints:
This enables the user to set up connections such as those described in the next section.
You can establish a connection at various times:
SecureLinx SLC User Guide
o n s
o n s
described how to configure and interact with an SLC device port
Another device port attached to an external device
Another device port with a modem attached
An outgoing Telnet or SSH session
An outgoing TCP or UDP network connection
Immediately. These connections are always re-established after reboot.
At a specified date and time. These connections connect if the date and time
have already passed.
After a specified amount of data or a specified sequence of data passes through
the connection. Following reboot, the connection is not reestablished until the
specified data passes through the connection.
82