Permissions; Global Port Settings - Lantronix SecureLinx SLC48 User Manual

Permissions

There are three types of permissions:
The administrator and users with local user rights may assign individual port permissions
to local users. The administrator and users with remote authentication rights assign port
access to users authenticated by NIS, RADIUS, LDAP, Kerberos and TACACS+.

Global Port Settings

On the Device Ports page, you can set up the numbering of Telnet and SSH ports, view a
summary of current port modes, establish the maximum number of direct connections for
each device port, and select individual ports to configure.
1. From the main menu, select Device Ports. The following page displays:
SecureLinx SLC User Guide
Direct (or data) mode: The user can interact with and monitor the device port
(connect direct command).
Listen mode: The user can only monitor the device port (connect listen
command).
Clear mode: The user can clear the contents of the device port buffer (set
locallog <port> clear buffer command).
8: Device Ports
62