Tacacs - Lantronix SecureLinx SLC48 User Manual

10: User Authentication
To view Kerberos settings:
show kerberos

TACACS+

Similar to RADIUS, the main function of TACACS+ is to perform authentication for remote
access. The SLC supports the TACACS+ protocol (not the older TACACS or XTACACS
protocols).
The system administrator can configure the SLC to use TACACS+ to authenticate users
attempting to log in using the Web, Telnet, SSH, or the console port.
Users who are authenticated through Kerberos are granted device port access through
the port permissions on this page.
All Kerberos users are members of a group that has predefined user rights associated
with it. You can add additional user rights that are not defined by the group.
To configure the SLC to use TACACS+ to authenticate users:
1. From the main menu, select User Authentication – TACACS+. The following
page displays.
SecureLinx SLC User Guide 118