Lantronix SecureLinx SLC48 User Manual page 29

Subnet Mask
Default Gateway
Hostname
Domain
Date & Time Settings
Change
Date/Time
Date
Time
Time Zone
Administrator Settings
Sysadmin
Password/
Retype
Password
6. To save your entries, click Apply.
SecureLinx SLC User Guide
If specifying an IP address, enter the subnet mask
specifying the network segment on which the SLC resides.
There is no default.
The IP address of the router for this network. There is no
default.
The default host name is slc. There is a 64-character limit
(contiguous characters, no spaces).
Note: The host name becomes the prompt in the
command line interface.
If desired, specify a domain name (for example,
support.lantronix.com).
Select the checkbox to manually enter the date and time at
the SLC's location.
From the drop-down lists, select the current month, day,
and year.
From the drop-down lists, select the current hour and
minute.
From the drop-down list, select the appropriate time zone.
To change the password (e.g., from the default) enter a
password of up to 64 characters.
4: Quick Setup
29