Local Users Commands - Lantronix SecureLinx SLC48 User Manual

Note:
cannot delete the UID or change the UID, port permissions, or custom menu.
3. Click Apply.

Local Users Commands

The following CLI commands correspond to the web page entries described above.
To configure local accounts (including sysadmin) who log in to the SLC by means
of SSH, Telnet, the Web, or the console port:
set localusers add|edit <User Login> <parameters>
Parameters:
To set whether a complex login password is required:
set localusers complexpasswords <enable|disable>
To enable or disable authentication of local users:
set localusers state <enable|disable>
To set a login password for the local user:
set localusers password <User Login>
To delete a local user:
set localusers delete <User Login>
To view settings for all users or a local user:
show localusers [user <User Login>]
SecureLinx SLC User Guide
You can change Escape Sequence and Break Sequence, if desired. You
allowdialback <enable|disable>
breakseq <1-10 Chars>
clearports <Port List>
custommenu <Menu Name>
dataports <Port List>
dialbacknumber <Phone Number>
escapeseq <1-10 Chars>
group <default|power|admin|>
listenports <Port List>
permissions <Permission List>
uid <User Identifier>
10: User Authentication
97