Lantronix SecureLinx SLC48 User Manual page 130

1 1 : P C C a r d
1 1 : P C C a r d
You can use the PC Card page to configure storage (Compact Flash) and modem/ISDN
PC cards. A Compact Flash is useful for saving and restoring configurations (see
Maintenance
75). The SLC supports a variety of Compact Flash-to-PC Card adapters, as well as
modem and Basic Rate Interface (BRI) ISDN cards. (See the Lantronix web site for a
complete list.)
To set up PC Card storage in the SLC:
1. Insert any of the supported PC Cards into either of the PC Card bays on the front
of the SLC. (You can do this before or after powering up the SLC.)
If the card is a compact Flash-to-PC Card adapter, and the first partition on the
Compact Flash is formatted with a file system supported by the SLC (ext2 and FAT),
the card mounts automatically.
2. If the card does not mount automatically, from the main menu, select PC Card. The
following page displays.
3. From the PC Card Slots table, select the button (on the right) for the PC Card you
want to configure for storage and click the Configure button. The following page
displays.
SecureLinx SLC User Guide
on page 139) and for Device Port Logging (see
SLC
PC Card Logging on page
130