Configuration And Image Files Commands - Dell PowerConnect 5324 Command Line Interface Reference Manual

sntp authenticate
sntp trusted-key
sntp client poll timer
sntp broadcast client
enable
sntp anycast client enable
sntp client enable
(interface)
sntp unicast client enable
sntp unicast client poll
sntp server
show clock
show sntp configuration
show sntp status

Configuration and Image Files Commands

Command Group
delete startup-config
copy
boot system
Grants authentication for received Network
Time Protocol (NTP) traffic from servers.
Authenticates the identity of a system to which
Simple Network Time Protocol (SNTP) will
synchronize.
Sets the polling time for the Simple Network
Time Protocol (SNTP) client.
Enables the Simple Network Time Protocol
(SNTP) broadcast clients.
Enables Anycast clients.
Enables the Simple Network Time Protocol
(SNTP) client on an interface.
Enables the device to use the Simple Network
Time Protocol (SNTP) to request and accept
Network Time Protocol (NTP) traffic from
servers.
Enables polling for the Simple Network Time
Protocol (SNTP) predefined unicast clients.
Configures the device to use the Simple
Network Time Protocol (SNTP) to request and
accept Network Time Protocol (NTP) traffic
from a server.
Displays the time and date from the system
clock.
Shows the configuration of the Simple Network
Time Protocol (SNTP).
Shows the status of the Simple Network Time
Protocol (SNTP).
Description
Deletes the startup-config file.
Copies files from a source to a destination.
Specifies the system image that the device loads at
startup.
Global
Configuration
Global
Configuration
Global
Configuration
Global
Configuration
Global
Configuration
Interface
Configuration
Global
Configuration
Global
Configuration
Global
Configuration
User EXEC
Privileged User
EXEC
Privileged User
EXEC
Access Mode
Privileged User
EXEC
Privileged User
EXEC
Privileged User
EXEC
Command Groups
25