Configuration And Image Files Commands - Dell PowerConnect 5424 Command Line Interface Manual

sntp unicast client enable
sntp unicast client poll
sntp server
show clock
show sntp configuration
show sntp status

Configuration and Image Files Commands

Command Group
dir
more
rename
delete startup-config
copy
delete
boot system
show running-config
show startup-config
show bootvar
38
Command Groups
Enables the device to use the SNTP to request and
accept NTP traffic from servers.
Enables polling for the SNTP predefined Unicast
clients.
Specifies SNTP UDP port of the SNTP server
Displays the time and date from the system clock.
Shows the configuration of the SNTP.
Shows the status of the SNTP.
Description
Displays list of files on a flash file system
Displays a file
Renames a file.
Deletes the startup-config file.
Copies files from a source to a destination.
Deletes a file from a Flash memory device.
Specifies the system image that the device loads at
startup.
Displays the contents of the currently running
configuration file.
Displays the startup configuration file contents.
Displays the active system image file that the device
loads at startup.
Global
Configuration
Global
Configuration
Global
Configuration
User EXEC
Privileged User
EXEC
Privileged User
EXEC
Access Mode
Privileged User
EXEC
Privileged EXEC
Privileged User
EXEC
Privileged User
EXEC
Privileged User
EXEC
Privileged User
EXEC
Privileged User
EXEC
Privileged User
EXEC
Privileged User
EXEC
Privileged EXEC