5-8 Compaq ProLiant ML750 Servers Setup and Installation Guide
Internal Storage Locations
Cabling with Controller Boards
Cage #3
Cage #2
Cage #1
Figure 5-5. Front of server
Use the following matrix as a guide to determine the correct cabling with SCSI
controllers. Illustrations and detailed instructions are provided in the
"ProLiant ML750 Server Cabling Scenarios" section later in this chapter.
ProLiant ML750 Cabling Matrix
Controller
PCI SCSI Controller Board
Compaq Smart Array
3100ES or 4250ES
Controller
Compaq Smart Array
3200 or 4200 Controller
0 1 2 3 4 5 8
0 1 2 3 4 5 8
2
1
0
0 1 2 3 4 5 8
Table 5-6
Drive Cages #1, #2, & #3:
Ultra3 Hard Drives
See Figure 5-6
Cables preinstalled for all
drive cages
See Figure 5-8
Removable Media Bays:
DLT, DAT Drives
See Figure 5-7
Not supported
Not supported