Regulatory Compliance Label Location; Regulatory Compliance Notices; Laser Devices; Laser Safety Warnings - Compaq 226824-001 - ProLiant - ML750 Setup And Installation Manual

Regulatory Compliance Label Location

The Regulatory Compliance label for your ProLiant ML750 server is located
inside the right side access panel near the front processor fans as shown in the
figure below. To view this information, remove the right side access panel.
Figure A-1. Location of Regulatory Compliance label

Laser Devices

All Compaq systems equipped with a laser device comply with safety
standards, including International Electrotechnical Commission (IEC) 825.
With specific regard to the laser, the equipment complies with laser product
performance standards set by government agencies as a Class 1 laser product.
The product does not emit hazardous light; the beam is totally enclosed during
all modes of customer operation and maintenance.

Laser Safety Warnings

WARNING: To reduce the risk of exposure to hazardous radiation:
Do not try to open the laser device enclosure. There are no


user-serviceable components inside.
Do not operate controls, make adjustments, or perform procedures to the


laser device other than those specified herein.
Allow only Compaq Authorized Service technicians to repair the laser


device.
Regulatory Compliance Notices A-7