Supported I/O Expansion Boards - Compaq 226824-001 - ProLiant - ML750 Setup And Installation Manual

Supported I/O Expansion Boards

The I/O board of the ProLiant ML750 server has 11 expansion slots. All slots
are PCI Hot Plug capable and will support a variety of industry standard I/O
expansion boards.
NOTE: Slots 10 and 11 are capable of operating at 66 MHz PCI, but the PCI bus will only
operate as fast as the slowest card installed in either slot.
Slot No.
1
2-4
5
6-9
10-11
NOTE: The primary Compaq dual-port 10/100 TX network adapter is normally located in
Slot 5. Remove the terminator plug from the second RJ-45 connector when using the
dual-port capabilities.
Table 4-7
Supported I/O Expansion Boards
Expansion Board
Remote Insight Board/PCI or Industry Standard 32-bit PCI Board (universal
or 5-V keying)
Industry Standard 32-bit or 64-bit PCI Board (universal or 5-V keying)
Primary Network Interface Card or Industry Standard 32-bit or 64-bit PCI
Board (universal or 5-V keying)
Industry Standard 32-bit or 64-bit PCI Board (universal or 5-V keying)
Compaq Array Controllers with Extended SCSI architecture or Industry
Standard 33-MHz or 66-MHz PCI (32-bit or 64-bit/universal or 3.3-V keying)
Installing Hardware Options 4-49