Compaq Remote-Flash Redundant Rom - Compaq 226824-001 - ProLiant - ML750 Setup And Installation Manual

Compaq Remote-Flash Redundant ROM

Through subsequent boots of the server, if any integrity errors are detected by
the Bootblock, the system will automatically launch the redundant image and
continue the Power-On Self-Test (POST) process.
If this situation occurs, you will see a "105" error message indicating which
system ROM is faulty. The ROMPaq utility flashes the failed system ROM to
the latest released version.
During the flash process, the ROMPaq driver automatically detects which
system ROM is inactive and flashes that system ROM with the image obtained
from the ROMPaq diskette. When the flash process is complete, the server
contains a fully redundant system ROM.
The system ROM can also be flashed remotely with the redundant ROM as a
backup.
NOTE: If you are familiar with the process of flashing a Compaq server via the ROMPaq
utility, there are no noticeable changes to the ROMPaq user interface. This feature is
implemented in the ROMPaq driver and the system boot block only. User configuration of
this feature is not required.
Troubleshooting E-15