Table E-5
Are all of the System Interconnect Status LED Indicators Off?
Answer
Possible Reasons
Yes
There is a broken connection between the
system board and power switch.
A power supply problem may exist. The power
supply may not be connected or inserted
properly, may have a damaged connector, or it
may have failed.
The power supply backplane may need to be
replaced.
There is a broken cable connection between the
system and backplane.
Troubleshooting E-11
continued
The Next Step
Check your power source to verify
an adequate supply of AC power.
Remove the power supply and
check for a damaged connector. If
connector appears okay, reinsert
the power supply, firmly and
correctly.
Check for bent pins on all power
cables.
Verify the proper connection of all
power cables.
Refer to "Power Problems" and "General
Hardware Problems" in the Compaq
Servers Troubleshooting Guide for further
options.