4-60 Compaq ProLiant ML750 Servers Setup and Installation Guide
3. Press on the top of the appropriate expansion slot release lever
open the lever toward the rear of the expansion slot
4. Remove the expansion slot cover
1
Figure 4-52. Preparing Hot Plug expansion Slot 10 for installation
5. Align the Compaq array controller with Extended SCSI into the Slot 10
or 11 divider alignment guides
the top of the slot connector
6. Secure the board by pushing the ejector levers downward
Figure 4-53. Securing expansion board with Extended SCSI
. Save the cover for future use.
2
. Insert the board until it is resting on
.
3
1
2
and
.
3
.
3
1