4-4 Compaq ProLiant ML750 Servers Setup and Installation Guide
5. Slide the hot-plug power supply into the power supply cage until seated
securely
.
6. Raise the handle to lock the power supply into place
supply fan will start immediately if the system is running.
1
Figure 4-3. Securing the hot-plug power supply
7. Plug in the power cord.
8. (Optional) Using the tie wrap provided, fasten the power cord to the
plastic loop provided on the power supply. Leave an 8-inch (20.32 cm)
service loop for the plug. This will prevent the plug from becoming
disengaged accidentally.
Figure 4-4. Securing the power cord to the plastic clip
. The power
2