3-16 Compaq ProLiant ML750 Servers Setup and Installation Guide
Table 3-4
Quick Reference List for Accessing Server Components
To Gain Access To:
Memory (DIMMs)
PCI Hot Plug expansion slots
Processor bus/core ratio switch
Processor Power Modules and
Processor Board Power Module
Processor sockets
Rear Internal Processor Fan (Fan 5)
Removable media bays
The following sections provide instructions for removing the top access panel,
the right side access panel, and the left side access panel. For information
pertaining to PCI Hot Plug and hot-plug I/O fan access, see Chapter 4,
"Installing Hardware Options."
WARNING: To reduce the risk of personal injury, disconnect all power cords
and unplug any telecommunications cables before removing any access panels.
Disconnect the power cord to avoid exposure to hazardous energy levels
that may cause burns when parts are short-circuited by metal objects such
as tools or jewelry.
Disconnect telephone cables to avoid exposure to shock hazard from
telephone ringing voltages.
CAUTION: Never operate the server with an access panel removed or partially
installed. Doing so could cause thermal damage to the hard drives or system
and could void your server warranty.
continued
You Will Need To:
Remove right side access panel and memory
expansion board
Open PCI Hot Plug access doors
Remove right side access panel
Remove right side access panel
Remove right side access panel
Remove Hot-Plug Processor Fan 6 from rear of
server chassis
Remove removable media frame and right side
access panel