Compaq 226824-001 - ProLiant - ML750 Setup And Installation Manual page 105

9. Verify that the two DIMMs inserted are within the same bank by
making sure they are installed on the same row of the memory
expansion board.
DIMM 2
DIMM 4
DIMM 6
DIMM 8
DIMM 10
DIMM 12
DIMM 14
DIMM 16
Figure 4-25. Location of DIMM sockets
10. Replace the memory expansion board. See "Removing and Replacing a
Memory Expansion Board" earlier in this chapter.
11. Replace the right side access panel. See the "Removing the Right Side
Access Panel" section in Chapter 3. Reconnect the power cords.
12. Open the PCI Hot Plug access doors and verify that system interlock
LEDs are normal. See the "System Interlocks" section in Chapter 3.
13. Turn on the server. See the "Power Up the Server" section in Chapter 3.
14. Verify that the memory was installed correctly by reviewing the POST
messages on the system console or the memory information under the
System Information Menu of the IMD. See Chapter 7, "Integrated
Management Log."
Bank 1
Bank 8
Installing Hardware Options 4-25
DIMM 1
DIMM 3
DIMM 5
DIMM 7
DIMM 9
DIMM 11
DIMM 13
DIMM 15