D-2 Compaq ProLiant ML750 Servers Setup and Installation Guide
System Interlock Status LED Indicators
The system LED on the front panel of the server turns amber to indicate that
the interlock chain has been broken.
IMPORTANT: To check system interlock status indicator LEDs, place the server in
STANDBY mode with the power supplies plugged in.
Figure D-1. System LED
Figure D-2 and Table D-1 show the location and identification of the system
interlock status indicator LEDs on the I/O board.
Figure D-2. System interlock status indicator LEDs on the I/O board
1
2
3