Pci Hot Plug Leds - Compaq 226824-001 - ProLiant - ML750 Setup And Installation Manual

Compaq proliant ml750 server setup and installation guide
Hide thumbs Also See for 226824-001 - ProLiant - ML750:
Table of Contents

Advertisement

PCI Hot Plug LEDs

The PCI Hot Plug amber LED
to the status of each slot. The LEDs are viewed from the rear of the server or
by opening the PCI Hot Plug access doors on the top panel.
Figure 4-39. PCI Hot Plug LEDs from rear of server
The following table indicates the appropriate slot condition and status for each
state of the two LEDs.
Amber LED
Off
On
and green LED

1
2
Table 4-6
PCI Hot Plug LEDs
Slot Status
Green LED
Slot does not require
On
attention.
Slot requires
Flashing
attention. There may
be a problem with
the slot, the PCI
board, or the driver.
Check the green LED
before opening the
slot.
Off
Installing Hardware Options 4-41
provide a visual reference

OK to Open
Slot Status
No
Power is applied to slot.
No
Power to slot is being
turned off or on. This
process may take
several minutes. DO
NOT open the slot
release lever until the
green LED is completely
off.
Yes
You may replace or
remove the board in
this slot only.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Proliant ml750 series

Table of Contents