Removing The Shipping Bracket - Compaq 226824-001 - ProLiant - ML750 Setup And Installation Manual

2-10 Compaq ProLiant ML750 Servers Setup and Installation Guide

Removing the Shipping Bracket

The Installing Rack Products CD is included with the server. You may


also want to refer to the following documentation:
G
Rack Resource CD Kit (shipped with Compaq racks)
NOTE: The Rack 7000/4000 Series Rack Resource CD Kit ships with all Compaq 7000
and 4000 Series Racks. The Rack 9000 Series Rack Resource CD Kit ships with all
Compaq 9000 Series Racks.
G
Rack Builder Configuration Tool CD (the files are available on the
Compaq website or the CD can be ordered with the Rack Resource
CD Kit)
G
Rack Information Library CD (the files are available on the Compaq
website or the CD can be ordered with the Rack Resource CD Kit)
To protect the power supply from damage during shipment, each power supply
is installed with a protective covering bracket. Figure 2-1 illustrates the
procedure for removing the brackets and screws.
IMPORTANT: Save the brackets and screws in a safe location. The brackets and screws
should be replaced if the server must be shipped in the future.
Figure 2-1. Removing the power supply shipping bracket