Removing A Pci Hot Plug Expansion Board - Compaq 226824-001 - ProLiant - ML750 Setup And Installation Manual
Compaq proliant ml750 server setup and installation guide
Hide thumbs
Also See for 226824-001 - ProLiant - ML750:
- User manual (147 pages) ,
- Basics manual (44 pages) ,
- Safety information manual (204 pages)
Table of Contents
Advertisement
Removing a PCI Hot Plug Expansion Board
1. Unlock and open the PCI Hot Plug access doors on the top access panel.
Figure 4-42. Opening the PCI Hot Plug access doors
2. Use the PCI Hot Plug Button or software application to turn power off
to the slot. The green LED will flash during the power down transition
and will turn off when power down is complete. For details on PCI
Hot Plug LEDs, see "PCI Hot Plug LEDs" earlier in this chapter.
3. When the slot's green LED is off, disconnect cables to the PCI board.
CAUTION: DO NOT open the slot release lever unless the slot's green PCI
Hot Plug LED is off. System power down and subsequent data loss could occur.
Installing Hardware Options 4-51
Advertisement
Table of Contents
Troubleshooting
