Attaching The Cable Management Arm Bracket And Cable Management Arm; Installing The Cable Management Arm Bracket - Compaq 226824-001 - ProLiant - ML750 Setup And Installation Manual

Attaching the Cable Management Arm
Bracket and Cable Management Arm
The cable management arm bracket and arm assembly organizes and secures
the cables in the back of the server. The cable management arm attaches to the
cable management arm bracket on the server and to the rack. All cables to and
from the server are tied to this arm and swing out of the way when you access
the server.

Installing the Cable Management Arm Bracket

The cable management arm bracket holds the cable management arm on the
server.
1. Slide the server out or access it from the rear of the rack.
2. Attach the cable management arm bracket to the left side of the back of
the server with two Torx-head screws.
Figure 2-14. Attaching the cable management arm bracket
Server Installation 2-25