I/O Board Expansion Slot Locations - Compaq ProLiant 5000 Reference Manual

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-6 Installing the Compaq ProLiant 5000 Server
2. Remove the Side Access Panel by loosening three thumb screws and
sliding the Side Access Panel forward.
Figure 2-4. Opening the front bezel and removing the side
WARNING:
internal system components to cool before touching.
CAUTION:
covers are an integral part of the cooling system and removing them while
the system is running may adversely affect data integrity.
CAUTION:
on the power to avoid damaging the server.

I/O Board Expansion Slot Locations

The ProLiant 5000 Server contains eight I/O expansion
slots: five PCI slots, one EISA slot and two shared
PCI/EISA slots.
Writer: Compaq Project: Installing the Compaq ProLiant 5000 Server Comments:
access panel
To reduce the risk of personal injury from hot surfaces, allow
Do not operate the server with the covers removed. The
Make sure the peripheral cables are plugged in before turning
File Name: F-ch2.doc Last Saved On: 4/18/97 5:09 PM