Replacing the Hot-Plug Redundant Rear Processor
Fans (Fan 6)
1. Turn the thumbscrew counterclockwise to release the rear processor
fans
Figure 4-62. Removing the rear processor fans from the chassis
WARNING: To reduce the risk of injury or damage to the equipment, do not
remove the internal processor fan assembly (Fan 5) while the server is powered
up. Fan 5 is not hot-plug capable. For information on placing the server in
Standby and disconnecting the power cords, see the "Powering Down the
Server" section in Chapter 3.
, pivot the fans outward
2
3
Installing Hardware Options 4-69
, and lift upward to remove
.
1