Ethernet Configuration; Lan Wizard: Select An Interface - Cisco ROUTER-SDM-CD User Manual

Ethernet Configuration

Element
Interface
Configure
Ethernet Configuration

LAN Wizard: Select an Interface

Cisco Router and Security Device Manager 2.5 User's Guide
3-2
Field Reference
Table 3-1 IP Address and Subnet Mask
Description
The name of the interface
To configure an interface you have selected, click Configure. If the
interface has not been configured before, Cisco SDM will take you through
the LAN Wizard to help you configure it. If the interface has been given a
configuration using Cisco SDM, Cisco SDM displays an Edit window
enabling you to change configuration settings.
The Configure button may be disabled if a LAN interface has been given a
configuration that Cisco SDM does not support. For a list of such
configurations, see
Be Read-Only.
The wizard guides you through the configuration of an Ethernet interface on the
LAN. You must provide the following information:
An IP address and subnet mask for the Ethernet interface
•
A DHCP address pool if you decide to use DHCP on this interface
•
The addresses of DNS and WINS servers on the WAN
•
• A domain name
Select the interface on which you want to configure a LAN connection in this
window. This window lists interfaces that can support Ethernet LAN
configurations.
Reasons Why an Ethernet Interface Configuration May
Chapter 3 LAN Wizard
OL-4015-12