Edit Match Protocol Values; Add Custom Protocols; Edit Match Acl; Configure Policing - Cisco ROUTER-SDM-CD User Manual

Chapter 29 Quality of Service

Edit Match Protocol Values

Add Custom Protocols

Step 1
Step 2
Step 3

Edit Match ACL

Configure Policing

OL-4015-12
To add a protocol to a class, choose a protocol from the Available Protocol Values
column on the left, and click the top double-arrowhead button to add it to the
Selected Protocol Values column. To remove a protocol from the Selected
Protocol Values column, choose the protocol and click the bottom
double-arrowhead button.
This window allows you to add custom protocols that are not available in the Edit
Match Protocol Values window. Do the following to define a custom protocol:
Select the name of the custom protocol from the Name list.
Select whether it will be used as a TCP or a UDP protocol.
Define the port numbers that this protocol will use. Enter a port number in the
New Port Number field, and click Add to add it to the Port Numbers list. To
remove a port number from the list, choose the number and click Remove.
Choose either Select an existing rule (ACL), or Create a new rule (ACL) and
select. Additional dialogs are displayed to enable you to create or select an
existing rule. If you want to clear existing rule associations, you can choose None
(clear associations).
In this screen, configure
Field Reference
Table 29-13 describes the fields in this screen.
Cisco Router and Security Device Manager 2.5 User's Guide
policing for a QoS policy.
Editing QoS Policies
29-19