Date And Time Properties - Cisco ROUTER-SDM-CD User Manual

Chapter 31 Router Properties
Date/Time
Router Time Source
Change Settings

Date and Time Properties

Synchronize with my local PC clock
Synchronize
OL-4015-12
You can see the router date and time settings on the right side of the Cisco SDM
status bar. The time and date settings in this part of the Clock Properties window
are not updated.
This field can contain the following values:
NTP – The router receives time information from an
•
User Configuration – The time and date values are set manually, using Cisco
•
SDM or the CLI.
No time source – The router is not configured with time or date settings.
•
Click to change the date and time settings on the router.
Use this window to set the router date and time. You can have Cisco SDM
synchronize the settings with the PC, or you can set them manually.
Check to set up Cisco SDM to synchronize router date and time settings with the
date and time settings on the PC.
Click to have Cisco SDM synchronize time settings. Cisco SDM adjusts date and
time settings in this way only when you click Synchronize. Cisco SDM does not
automatically resynchronize them with the PC during subsequent sessions. This
button is disabled if you have not checked Synchronize with my local PC clock.
Cisco Router and Security Device Manager 2.5 User's Guide
Date and Time: Clock Properties
NTP server.
31-3