Edit Ips - Cisco ROUTER-SDM-CD User Manual

Chapter 27 Cisco IOS IPS

Edit IPS

IPS Policies Button
Global Settings Button
Auto Update
SEAP Configuration
OL-4015-12
In this example, the Cisco IOS IPS policy is applied to the FastEthernet 0/0 and
the FastEthernet 0/1 interfaces. The signature file is located on the PC. The config
location is on router flash memory, in a directory named configloc.
In this window you can view the Cisco IOS IPS buttons for configuring and
managing Cisco IOS IPS policies, security messages, signatures, and more.
Click to display the Edit IPS
IPS on an interface and view information about how Cisco IOS IPS is applied. If
you enableCisco IOS IPS on an interface, you can optionally specify which traffic
to examine for intrusion.
Click to display the Edit IPS: Global Settings
that affect the overall operation of Cisco IOS IPS.
This button appears if the Cisco IOS image on the router is version 12.4(11)T or
later. Auto Update allows you to configure the router to obtain the latest signature
updates from the Cisco Security Center automatically. Refer to
Update for more information.
This button appears if the Cisco IOS image on the router is version 12.4(11)T or
later. Signature Event Action Processing (SEAP) gives you greater control over
IOS IPS by providing advanced filtering and overrides.
Cisco Router and Security Device Manager 2.5 User's Guide
window, where you can enable or disableCisco IOS
window, where you make settings
Edit IPS
Edit IPS: Auto
27-9