Other Tasks In A Nac Implementation - Cisco ROUTER-SDM-CD User Manual

Create NAC Tab
Enable AAA Button
Launch NAC Wizard Button
How Do I List

Other Tasks in a NAC Implementation

Step 1
Step 2
Cisco Router and Security Device Manager 2.5 User's Guide
30-2
The NAC configuration on the router is only one part of a complete NAC
implementation. Click
that must be performed on other devices in order to implement NAC.
Authentication, authorization, and accounting (AAA) must be enabled on the
router before you can configure NAC. If AAA is not enabled, click the Enable
AAA button. If AAA has already been configured on the router, this button is not
displayed.
Click this button to launch the NAC wizard. The wizard divides NAC
configuration into a series of screens in which you complete a single
configuration task.
If you want to create a configuration that this wizard does not guide you through,
click the button next to this list. It lists other types of configurations that you
might want to perform. If you want to learn how to create one of the
configurations listed, choose the configuration and click Go.
A full NAC implementation includes the following configuration steps:
Install and configure the Cisco Trust Agent (CTA) software on network hosts.
This provides hosts with a posture agent capable of responding to
queries by the router. See the links after these steps to obtain the CTA software
and learn how to install and configure it.
Install and configure an AAA authentication EAPoUDP server. This server must
be a Cisco Secure Access Control Server (ACS) using the
Secure Access Control Server software version 3.3 is required. See the links after
these steps to learn more about installing and configuring ACS.
Other Tasks in a NAC Implementation
Chapter 30 Network Admission Control
to learn the tasks
EAPoUDP
RADIUS protocol. Cisco
OL-4015-12