Vty Settings; Edit Vty Lines - Cisco ROUTER-SDM-CD User Manual

Chapter 31 Router Properties

vty Settings

Note

Edit vty Lines

OL-4015-12
This window displays the virtual terminal (vty) settings on your router. The
Property column contains configured line ranges and configurable properties for
each range. The settings for these properties are contained in the Value column.
This table shows your router vty settings and contains the following columns:
Line Range—Displays the range of vty connections to which the rest of the
•
settings in the row apply.
Input Protocols Allowed—Shows the protocols configured for input. Can be
•
Telnet, SSH, or both Telnet and SSH.
Output Protocols Allowed—Shows the protocols configured for output. Can
•
be Telnet, SSH, or both Telnet and SSH.
EXEC Timeout—Number of seconds of inactivity after which a session is
•
terminated.
Inbound Access-class—Name or number of the access rule applied to the
•
inbound direction of the line range.
Outbound Access-class—Name or number of the access rule applied to the
•
outbound direction of the line range.
ACL—If configured, shows the
•
Authentication Policy—The
•
vty line. This field is visible if AAA is configured on the router.
Authorization Policy—The AAA authorization policy associated with this
•
vty line. This field is visible if AAA is configured on the router.
To use SSH as an input or output protocol, you must enable it by clicking SSH in
the Additional Tasks tree and generating an RSA key.
This window lets you edit virtual terminal (vty) settings on your router.
Cisco Router and Security Device Manager 2.5 User's Guide
ACL associated with the vty connections.
AAA authentication policy associated with this
vty Settings
31-15